Average Reviews:
(More customer reviews)Pros: reasonable price; three ports for wired connections; reasonably simple administration procedures and usable interface; integrated print server (parallel connector)
Cons: no support for bi-directional communications with my HP LaserJet 1200se (e.g., it no longer tells me I'm out of paper, etc.).
After scouring the Web for insight and equipment reviews (the PracticallyNetworked site was especially helpful) of the myriad of router options, I decided on this one from D-Link. My housemate and I needed to share our newly installed cable Internet service in our three-story house, so wireless seemed like the easiest option. I put the router in my office on the second floor, and he has no trouble accessing the Net by laptop from his office on the first floor, and I can usually get 500+ Kbps (on a PII-333 laptop running a NetGear PC card) in the living room on the third floor. 2Wire's bandwidth meter clocks about a 1.5 Mbps connection for my P4-1.2 wired directly to the router.
I haven't had to call D-Link for tech support, so I can't speak to their abilities/response time. I did use their Web site to download a firmware upgrade. All told, I had our wireless net up and running in less than an hour (which also included a call into RCN to get them to tweak our cable modem on their end).
One thing to bear in mind: pick access clients that are solid performers, whether they're PC card or USB devices. Routers like this are only the access point portion of the wireless equation -- speed and range can be easily hobbled by anemic clients that can't hold up their end of the bargain.
Click Here to see more reviews about: D-Link DI-713P Wireless Broadband Router and Access Point with 3-Port Switch
The D-Link DI-713P is a broadband IEEE 802.11b compliant wireless gateway. It provides the ability to share a broadband connection as well as a print server function. You can share a DSL or cable modem connection through its three local 10/100 Ethernet ports or via its integrated Wireless IEEE 802.11b component. The DI-713P is equipped with a bidirectional LPT port to support a direct printer connection. Its integrated router and firewall provide NAT, DHCP, and packet filtering services between the local network and the Internet.
D-Link's DI-713P allows wireless LAN users to share the Internet connection while providing the security of 128-bit encryption. Static address support, integrated DHCP, PPPoE, and device name support will allow it to connect to nearly any broadband provider, whether cable or DSL based, and at the same time simplify local area network settings.
The DI-713P provides two levels of security support. First, it masks local users' IP addresses from others on the Internet, making it much more difficult for a hacker to target a machine on the network. Second, it can block and redirect certain ports to limit the services that outside users can access. Specific ports can be opened by the user to ensure that games and other Internet applications will run properly.
The router and access point combo also provides special pass-through for common VPN implementations including PPTP (Point to Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol) and IPSec*. The Virtual Server feature allows the user to expose HTTP, FTP, Game Servers, and other local services to be accessible to Internet users located outside the LAN. The User-Definable Application Sensing Tunnel feature allows the user to define the attributes to support special applications requiring multiple connections, such as Internet gaming, video conferencing, and Internet telephony. A DMZ setting can be applied to a single client behind the DI-713P to expose it to the Internet and ensure complete Internet application compatibility, even if specific ports are not known.
Unlike proxy server or NAT software that requires the software server to remain visible on the Internet, no local computers are directly externally visible when using the DI-713P. Also, the DI-713P, like broadband, is always on, removing the need to constantly boot a software server when Internet access is desired from a client.
Integrated DHCP services allow up to 252 users to obtain their IP address automatically on bootup from the DI-713P. Client machines require no software; simply set them to accept a dynamically assigned IP address and reboot. Each time they are powered up, the DI-713P will recognize them and set their IP address to instantly connect them to the LAN.
* PPTP, L2TP, and IPSec support compatibility are dependent on the platform used.
No comments:
Post a Comment