Average Reviews:
(More customer reviews)My network is two wireless XP laptops and a Linksys 802.11b router so I was a little worried about mixing networking brands - but it worked out fine. Virtually no slowdown compared to having the printer directly connected to the laptop and I print some pretty big files. Setup wasn't too bad (~15-20 min staring at the manual really confused, 5 min reading amazon.com reviews, ~20-30 min installation). Much like what Hafizullah said, it's better to config in steps: configure the printer in the wired configuration and then get it to work wirelessly. Since the manual is mostly useless, here's what I did:
1. Wire it up (connect the print server to the router with an ethernet cable and the printer to the print server by USB).
2. Turn on printer, power on the print server (after startup sequence of ~20 sec, ethernet light should be lit).
3. At this point open up a browser and go to "192.168.0.10" and the print server config utility should start.
4. Click on the "configuration" tab and set: password, connection mode (mine is infrastructure), ESS-ID (your network's name), wireless channel, WEP (# bits and password). It's important to type the WEP key in exactly with no spaces or dashes because the utility won't give any error message if the password is wrong. Click 'save'.
5. Click on the "Network" tab and change the IP address if you want. It has to be within the range of assignable IP addresses for your wireless network (e.g. my router assigns from 192.169.1.1 to 192.169.1.101, so I set the print server to 192.169.1.2). Make sure to set "manually assign" otherwise you won't know what address your printer is on! I think the workgroup has to be set, but I'm not sure (I set it to the name of the wireless network).. Click 'save'.
6. At this point you should be able to print a test page. Click on the "tools" tab and click to print a test page. If it prints, you're in business.
7. Now you can set up the printer drivers. The instructions are actually pretty good for this, so use them here. Once that's done, try printing something that isn't a test page to make sure the printer itself is set up OK.
8. Now to configure the wireless portion. Unplug the ethernet cable, and click the reset button (recessed in the back of the print server). Once it finishes booting, the "wireless" light should be on or blinking. If so then you should be done. Try printing something.. I didn't have everything correctly set up initially, so this step took a few minutes. I think everything necessary to set was covered in #4.
Good Luck!
Click Here to see more reviews about: D-Link DP-311U Wireless Print Server, 1-USB Port, 802.11b, 11Mbps
The D- Link DP-311U is a compact, 802.11b compatible, wireless print server that allows network users to share a USB printer. The DP-311U is equipped with one USB version 1.1 port for seamless connection to most USB printers available on the market today and supports both infrastructure or ad hoc wireless modes. Its compact size, easy to use configuration tools including a Web Browser or Windows based configuration program, and affordable price make the DP-311U print server the ideal network printing solution for small offices, home offices, schools and other businesses that require printer sharing.
No comments:
Post a Comment