Average Reviews:
(More customer reviews)I just purchased the Schlage Link from amazon.com, got it yesterday, and followed the instructions exactly. Watch out. It's a trainwreck. Here's the rundown step by step:
1. After pairing the bridge to my schlage lock and lamp module, I went online to register. Before you can do ANYTHING, before you can even test that the box is working, you must give them a credit card which they charge up front and enroll you in a monthly subscription. You can't do anything without paying them monthly, and there's no trial period or anything to see that the device works before you enroll. And they told me on the phone this subscription enrollment is non-refundable even if the device doesn't work and I return it to Amazon. So, the bottom line is, I had to start paying them up front just to find out that the product is totally broken.
2. When you try to pay them, the web browser (firefox) gives warnings that Schlage's online security certificate is not properly setup. The only way to proceed is to click "exceptions", even though Firefox warns you that you should never do this and no legitimate company will ask you to. Screen shot attached. If Schlage doesn't even have the technical skills to secure their online credit card page and keep my credit card safe, something every mom and pop etailer can do, how on earth do they expect me to trust that their lock entry system is safe? Clearly they don't trust themselves since, the first step of the online process, requires you to accept terms and conditions that waive any responsibility on their part, even if they are negligent.
3. During the setup I chose to have them send the cell phone app to my Blackberry. The cell phone app, also, does not have a security certificate and the Blackberry warns you that it's unsigned and untrusted.
4. Right now, you cannot use the Schlage link with ANY cameras or thermostats or sensors or scene controllers or handheld remotes or any of the other hundreds of ZWaves devices out there, except basic lamp modules. Schlage confirmed this when I called their support line. They said that in a few months they will sell a Schlage brand camera and it will work with their camera, but not with 3rd party IP cameras. So my Panasonic IP cameras will not work at all and I have to buy all new Schlage cameras; which, btw, don't appear to have pan/tilt/audio and other stuff like the Panasonic.
5. At this point I've resigned that this bridge will, basically, just allow me to control the Schlage lock, and for everything else I will need another gateway. But, wait, it gets worse. The web interface at Schlage's site says my bridge is disconnected. But that's wrong. It ---IS--- connected. And I can login to my dhcp server and see that it's getting an IP. So it is plugged in and working. There is NOTHING in Schlage's documentation to explain this. The green light on the bridge is blinking 3 times. But there is nothing to indicate if this is normal, or an error. So I call Schlage's customer support line. I get bounced around between low level operators who know nothing more than to read trouble shooting guides. They ask stupid questions that prove they don't know what they're talking about. They ask me to try removing/reinserting the ethernet cable. At this point the bridge locks up; all the lights stop working. We need to remove the battery to get it working again. Then we need to exclude and pair again the lock and lamp module. Still nothing. They tell me to get a longer ethernet cable (mine is 6') so I can move the Schlage bridge further from my network router. Huh??? It's not a wi-fi device, it's hardwired. What's that about? They can't give me a technical explanation, just saying it's on their trouble shooting guide that the Schlage should not be too close to the router. After an hour on the phone, they say that an engineer will need to look into it and get back to me. They can't give me a timetable. And they don't have any answer about getting back the money they charged me up front for their subscription.
Bottom line: the lock works as a lock. You can lock/unlock it with a key and with the pin pad. But the bridge is a joke. It doesn't work at all. And it's impossible to troubleshoot because, although the bridge gets an IP address, it doesn't run a web server or telnet or anything else to let you log into the bridge itself and see what's wrong. All you can do is login through schlage.com and see that "the bridge is disconnected". Therefore, without a way to talk to the bridge locally on my network, and with the bridge unable to connect to schalge's online service, I seriously doubt they'll ever be able to get it working and imagine it's just a black brick. After all, if the Schlage bridge is too buggy to get a network connection and find the Schlage server, how will it ever upgrade, since there's no way for me to talk to it over my local network.
The part that pisses me off the most is that I had to pay up front for their stupid subscription just to find out this thing doesn't work and can't get my money back! So watch out!
Click Here to see more reviews about: Schlage LiNK Wireless Keypad Deadbolt Starter Kit System, Bright Brass
Schlage LiNK is more than a lockset. It's a brilliant new system that enhances your home's security, and your family's peace of mind--offering a new level of freedom to home security.
No comments:
Post a Comment