Cisco-Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit Review

Average Reviews:

(More customer reviews)I used this to allow me to place my wireless access point in a location that does not currently have a local power source. Suffice it to say, this product is a cheaper investment then hiring an electrician.
As noted in the cons, you may want to limit the use of this to 10/100 speed products. This may not be the best solution for your router/gateways.
It's very easy to install and works perfect. I like the fact that it came with it's own power supply. It also came with a cat 5e cable. Now for the pros and cons...
Pros
============
- Easy to install
- Perfect compliment to wireless access points
- Very inexpensive option, when compared to installing a new outlet
Cons
============
- It's heavy and more bulky then I expected. It seems unusual for just sending a DC current
- I wish it didn't have the 'built-in' cat 5 whips. I would have preferred that they supply the whips, with an option to use something else. It's mostly an issue on the switch side. I have this dongle hanging from the switch and it wants to pull the switch off the table. No issue if your switch is somehow mounted
- It appears to be only compatible with Linksys products. Not that big of an issue, but if I wanted to use a different brand access point, this goes out the window
- Appears to only transmit at 10/100. So if you have a 802.11 N AP, you may not be able to take advantage of the full speed.
Although my cons list is larger then the pros, I would still recommend this product for anyone that would like to move their WAP to a remote location.

Click Here to see more reviews about: Cisco-Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit

-The Linksys 12 Volt Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to many standard 12 volt access points and other network devices, you save the time, hassle, and expense of running AC power to the access point s installation location. -The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, theres usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble. -The 12 Volt Power Over Ethernet Adapter Kit is a two piece set.

Click here for more information about Cisco-Linksys WAPPOE12 12 Volt Power Over Ethernet Adapter Kit