Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication) Review

Average Reviews:

(More customer reviews)I researched competing products from DLink and NetGear online and read numerous reviews. Any of the HD-PLC products should perform similarly in the same situation. Before deciding on a powerline Ethernet product be sure to understand that the quality of your home wiring and the distance the signal must travel all can affect the performance of the product. Poor quality wiring or very long electrical runs may limit performance.
What I liked most about the Panasonic product is that the kit which includes two units is preconfigured, so it works right out of the box without any special configuration. I didn't have to install ANY software to get my network running. I plugged in one unit to my Internet router, and the other unit into a power outlet in a nearby office. Once I connected the Ethernet cable, I was up and running. It was really that easy.
One nice thing with this unit is that you can run a speed test from the unit itself, with the front LED's displaying the estimated network performance. This was handy as I tried different outlet combinations to acheive the best performance. As a side note, I found that plugging the "Master" unit into an outlet as close as possible to the breaker box yeilded the best results. By putting the master as close to the break box as possible (electrica wiring distance) I was able to get a much better signal. I have the master unit in a downtairs room that is about 40' from the breaker box, and the secondary unit in an upstairs office that is about 65' feet from the breaker box.
Note that any powerline Ethernet product is susceptible to interference from other devices. Pay attention to the manual regarding the types of devies that can cause interference, and avoid ever pluggint the device into a surge protector, since that will greatly limit performance.
An additional nice feature of the Panasonic unit compared with DLink and NetGear is that the unit has a power cable. This allows me to plug it into "hidden" outlets, and then place the box in an easy to reach location. Both the NetGear and DLink products are a box that plugs directly into the outlet. This makes them more difficult to access, especially if you want to look at the box to see what it is doing. I like that the Panasonic can sit nicely on the corner of my desk and I can see the lights. I also suspect that the Panasonic will operate cooler since it can be placed in locations where there is air flow all around the unit.
Performance will vary by house and situation. I have a gigabit network switch that connects my machine directly to a server. When I copy a 50 megabyte file to my server using Windows XP, it takes 8 to 9 seconds to copy a 50 megabyte file. Running the same 50 megabyte file copy to a machine on the HD-PLC network connection took about 27 seconds. This seems to be pretty good performance overall. Note that "speed test" is only as good as what is being tested. My test was a real world test under Windows XP copying a 50 megabyte ZIP file.

Click Here to see more reviews about: Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

The HD-PLC (High Definition Power Line Communication) ethernet adaptor makes it possible for your home electrical wiring to serve as a link between your PC and modem. Getting online access is as easy as plugging into a power outlet. You can move your PC and connect to the internet anywhere there is a power outlet in your home!

Click here for more information about Panasonic BL-PA100KTA Ethernet Adaptor Starter Pack Includes two HD-PLC (High Definition Power Communication)

Read More...

Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White) Review

Average Reviews:

(More customer reviews)Years ago, I purchased one of the first through-power-line Ethernet kits on the market. At the time, the claimed throughput was low (say, 10mbps), and the actual throughput was ridiculously slow. Not to mention the fact that the connection seemed to hang inexplicably with great frequency. In a word: Not ready for primetime, not ready for anything, really...
Fast forward nearly a decade. By now, wireless Ethernet routers are cheap and easy to use and just about everyone has one.
Into this environment, Actiontec has dumped their new MegaPlug "200 Mbps" powerline network kit.
Your first question, and it's a good one, is: "What's the point?" And for many people the answer will be "none, really, in your situation."
BUT there are two sets of people for whom something like this--if it works--is a godsend.
First off, there are those who simply cannot set up something like a wireless router. It's not hard, but there are still a lot of complete tech phobes out there. Think: your Grandparents, or maybe even your parents. Sure, you could go over and set things up for them. But then what happens the first time the router goes down and needs to be rebooted or whatever? Panic calls at midnight are not most people's idea of bonus time.
The second set of people who could use something like this, if it works, are those with wireless dead spots in their homes. There are a lot of people like this, actually. No matter where you set up the wireless transmitter, some places just get no signal, or a very lousy one. Now, you can--if you are technically inclined--set up a wireless repeater to address issue. But it's a bit tricky for most people who don't relish spending their Friday night shopping the halls of Frys, Microcenter or BestBuy. This kit offers a simple alternative to a wireless repeater.
OK, enough on who might want this. On to the more significant question: Does it actually work, and how easy is it, really, to set up.
I'll answer the second question first. It is ridiculously, stupidly, unbelievably easy to set this up. Plug one unit in one wall outlet. Run ethernet cable from unit to your router. Plug second unit into another wall outlet anywhere else in your house. Run either cable from unit to the device you want to talk to router. And you are done. Even if you have trouble figuring out how to open the door of a refrigerator, it can't take you more than 5 minutes to set up.
And how does it work? SHOCKINGLY well. In a three story home with about 20 separate circuits (lines on their own circuit breakers), I was unable to find two outlets that could not communicate with each other at a reasonable speed, and without any disruptions. You aren't going to see 200Mbps in the real world, but I saw between 24Mbps and 34Mbps, depending on where I placed the two outlet plugs. Before you sneer, this compares to a normal transfer rate of about 18Mbps for a GOOD wireless G connection. In other words, the Actiontec kit gave transfer rates that were between 33% and 90% FASTER than wireless G!
I can recommend this unconditionally to those who need an alternative to standard wireless with one caveat (and it's a big one): This kit is quite pricey. It runs over a hundred bucks at the time of this writing, as compared to a good quality wireless G router, which can be purchased for as little as $30. In addition, this kit is good for connecting only one location to another single location, whereas wireless is...everywhere.
But if you can get past the price, this kit is terrific.

Click Here to see more reviews about: Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Actiontec MegaPlug HPE200AVP Kit Powerline Network Adapter HLE20003-01KP 754

Get 17% OFF

Click here for more information about Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Read More...

Cisco-Linksys WGA54G Wireless-G Gaming Adapter Review

Average Reviews:

(More customer reviews)This took me about 2 hours to set up, after about 20 attempts. The hardware works fine, but both the setup utility and the operating manual are poor and only handle connecting to simple networks. I have a non-standard (read: I didn't let Microsoft set up my network automatically) network and a Linksys Wireless G router, with 128 bit WEP (encryption) as well as MAC filtering set on. (My neighbor across the street also has a wireless network, which I didn't know until I started fooling around with this one.)
In essence, if you use a router gateway to the net (which you absolutely should for its inherent hardware firewall capabilities) and you use wireless encryption (which you absolutely should to make it difficult for a techie neighbor from eavesdropping in on your network) you must set this device up manually. Not only that, but you have to set up your game machine network settings manually as well.
First, routers usually also act as DHCP servers (meaning that they'll automatically give an IP address to anything logging onto the network). That means that unless you give the device a static IP address you're never sure which address your game machine will have when it boots up. The same thing is true of the WGA54G. Unless you specify a proper static IP address and netmask, it won't connect. So you have to give both the game machine and the WGA54G (different) static addresses within the range of your local network and which don't conflict with any existing devices.
Secondly, if you do MAC filtering, you need to realize that the WGA54G has TWO ethernet adapters: the wired one (which you stick the cable plug into) and the wireless one (that connects to the antenna). The MAC address of the WIRELESS device must be included in the filter settings of your router, or it'll be blocked. Linksys doesn't make it clear how to find that address (it gives you the wired MAC address on the label), but the wireless MAC device is one of the two MACs you've got to include in your
router's filter list. (Hint: it's one digit higher than the wired MAC address -- just add 1 to the last two hex digits). The other MAC address needed is of the IP adapter contained in your game device (or attachment). That you have to obtain from your game network setup screens. I'm not completely sure why the WGA54G's wired adapter address isn't needed, my guess is that since it doesn't make any packet requests of the wireless router (interacts only with the game machine) it's not "seen" by the router.
You'll have to all of this by logging into the WGA54G's built in HTTP (web) server interface and your router's interface, not with the setup software on the disk.
Finally (on the Xbox, anyway), you've got to specify another static IP address for the game adaptor AND specify the router address as the DNS server (remember it allocates IP addresses for connected devices and stands between you and the internet, translating your network requests to the outside world.
If this sounds like Greek to you, well you're in good company. But this device is not inexpensive and is promoted as being easy to use.
It may be that Linksys can't tailor its software to every situation, but they can certainly write better documentation to help novices cope with the issues raised by slightly more complicated local networks. I also think that its odd that a wi-fi "G" device doesn't support the newer and more secure WPA encryption standards (which Linksys certainly includes in its wireless routers). That means that you will have to run your whole network on WEP encryption if you have this device set up, because WPA devices can't coexist with WEP encryption. WEP can be hacked, and WPA basically, cannot (unless you're a lot spookier than the average wardriver).
Yeah, it runs kind of hot, and yeah its LED lights are kind of strange, but who cares about that? The problem with this device is that it seems to have been shipped too early and because it's a game device is not being seriously supported or updated by Linksys in the same way that they'd support a "serious" device.
Like I said, the hardware seems to work fine (haven't experienced any of the dropped signals others report here), it's the software and documentation that's lacking.
Is there a better alternative? I don't know, I don't have the money and time to find out and I got this puppy running, so I'm movin' on to other things. I do know that Linksys is a decent manufacturer and can do better.

Click Here to see more reviews about: Cisco-Linksys WGA54G Wireless-G Gaming Adapter

Item #: 804442. The Wireless-G Game Adapter gives any wired Ethernet-equipped game console wireless connection capabilities. The Game Adapter can be used in two different ways. If you have an existing home wireless network and a cable or DSL Internet connection, the Game Adapter lets your PlayStation 2, Xbox or GameCube attach to the network so you can get into online games without running wires to the game room. Or, use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming - in the same room, or all the way across the house.It's completely driver-free, so it works on any platform. Since there are no drivers to load, setup is a snap. In some cases, it works right out of the box! If your setup's a little different - just configure the network settings through your PC's web browser, plug it into your game box, and go.The Wireless-G Game Adapter provides lag-free gaming with communication speeds up to 54Mbps when connected to other Wireless-G devices. It can also connect to Wireless-B (802.11b) devices and networks at 11Mbps.Spend your time gaming, not stringing wires, with the Linksys Wireless-G Game Adapter. Product Description: Linksys Instant Wireless Wireless-G Game Adapter WGA54G - network adapterDevice Type: Network adapterForm Factor: ExternalInterface (Bus) Type: EthernetDimensions (WxDxH): 6.3 in x 3.9 in x 1.4 inWeight: 0.4 lbsData Link Protocol: IEEE 802.11b, IEEE 802.11gData Transfer Rate: 54 MbpsFrequency Band: 2.4 GHzCompliant Standards: IEEE 802.11b, IEEE 802.11gManufacturer Warranty: 3 years warranty Customers also search for: Discount Linksys Instant Wireless Wireless-G Game Adapter WGA54G - Network Adapter, Buy Linksys Instant Wireless Wireless-G Game Adapter WGA54G - Network Adapter, Wholesale Linksys Instant Wireless Wireless-G Game Adapter WGA54G - Network Adapter, 0745883555826, WGA54G, Network Adapters

Click here for more information about Cisco-Linksys WGA54G Wireless-G Gaming Adapter

Read More...

Cisco-Linksys Dual-Band Wireless-N Gaming Adapter Review

Average Reviews:

(More customer reviews)I have this product connected to my directv hd receiver to download VOD content. If the installation software is not able to detect the device during the installation process, then follow these steps (I had to perform these steps when I called Linksys for assistance. I wish they had just documented the steps instead):
1. Quit out of the installation software (keep the adapter connected to your pc)
2. Assign a static IP to your pc (if you do not know how to do this, then call Linksys or google it). The static ip settings should be:
ip: 192.168.1.50
subnet: 255.255.255.0
gateway: 192.168.1.1
leave dns settings as is
3. Open up your browser and type http://192.168.1.250 in the address bar. You will now see a log in page
4. Log in with admin/admin
5. Now assign a static IP to the adapter
ip: 192.168.1.250
subnet: 255.255.255.0
gateway: 192.168.1.1
6. Now go to the wireless settings tab and enter in your SSID and WEP/WPA Key. Make sure you select the correct authentication type
7. You will now need to reboot the adapter (it will ask you to do so)
8. Once the device is back up, go back to the http://192.168.1.250 page and log back in. Double-check to make sure your settings were entered in correctly. The wireless light should light up on your adapter.
Tip: Before you connect it to your console/receiver, you can test to make sure the adapter can connect to the internet. Switch off your wireless connection on your pc/laptop and connect the adapter to your pc via the ethernet port. Try accessing the internet and if you can, then the adapter is all set.
Good luck.
p.s. the main reason I detailed out the steps for the "advanced setup" is so that people know that it is still a straight-forward process, so no need to be afraid if you won't have the plug-and-play experience.
another tip. if you are still having issues, then try changing the channel on your router (although you should not have to if all your other wireless devices are working well on that channel).

Click Here to see more reviews about: Cisco-Linksys Dual-Band Wireless-N Gaming Adapter

The Dual-Band Wireless-N Gaming Adapter gives wireless connection capabilities to any wired Ethernet-equipped game console. The Game Adapter can be used in several different ways. If you have an existing home wireless network and a cable or DSL Internet connection, the Game Adapter lets your Xbox, Xbox 360, PlayStation2 or 3, or GameCube attach to the network so you can get into online games without running wires to the game room. Or, use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming -- in the same room, or all the way across the house. There is also a special "Wireless LAN Party" mode to connect several consoles at once.

Click here for more information about Cisco-Linksys Dual-Band Wireless-N Gaming Adapter

Read More...