Average Reviews:
(More customer reviews)This antenna (and all D-Link high gain antennas) require an additional 1 watt inline amplifier in order to achieve the extended range as rated by D-Link. This will be an additional expense of approximately $300.00, purchased from a 3rd party. Without the amplifier the antenna(s) produce a signal at or below the standard antenna. Once the amplifier is installed the antenna works as rated. No where within D-Link's information or installation instructions do they inform you of this requirement. When I inquired from D-Link as to why I was no obtaining the range as rated, I received the following:
"To boost output you will need to use an amplifier. The Antenna is going to change the shape of the signal, and the direction. the problem with using an external antenna without an amp is the Router does not have enough power to push the signal through the extra media."
I then asked as to where within their documentation does it state that an amplifier is required, I received the following:
"The initial reply that you received that the router does not have a strong enough amplifier to push the signal to any great length is correct, unfortunately. The loss in signal strength that you noticed is possibly due to losses in the conversion cable. I do agree with you that does not seem to mention amplification in the product specs as you have pointed out. I shall talk it to a supervisor and see if there can be some mention of extra amplification might be needed, to get best results for APs."
Click Here to see more reviews about: D-Link ANT24-0801 8.5dBi Pico Cell Patch Antenna
NETWORK, 8.5DBI PICO CELL PATCH
Click here for more information about D-Link ANT24-0801 8.5dBi Pico Cell Patch Antenna
No comments:
Post a Comment