Belkin F5D5130-5 Ethernet 5 Port Networking Switch Review

Average Reviews:

(More customer reviews)The Belkin F5D5130-5 Ethernet 5 Port Networking Switch
by Belkin Components was one of the easiest installs I have experienced with Windows XP Home Networking. Belkin supplies all the software for your install. I have used other swithches that I ran into all kinds of problems with, but not with the Belkin F5D! This can save you a couple of hours!

Click Here to see more reviews about: Belkin F5D5130-5 Ethernet 5 Port Networking Switch

5-port network switch

Click here for more information about Belkin F5D5130-5 Ethernet 5 Port Networking Switch

Read More...

HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch Review

Average Reviews:

(More customer reviews)These are great switches and just as fast as the compitition with ONE exception.. THEY DONT BREAK!
I've used them all and the major complaint I have with most home switches is the HEAT they generate. You can put money down that Your Cisco Linksys or DLINK switch is going to last about a year. They do give you a warranty and an easy replacement but I would rather buy a switch that I didnt need to exorcise the return policy every 1-2 years thank you very much.
The ProCurve Switches use external brick type power supplies that keep the heat away from your switch processor. This May be an issue for Business applications that use rack mounting, but for home use ProCurve hits a Home Run!

Click Here to see more reviews about: HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

The HP ProCurve Switch 1400-8G is a small form factor gigabit unmanaged stackable switch with 8 ports of 10/100/1000. It features fan-less for silent operation. Primary InformationNetworking Type:SwitchForm Factor:ExternalData Transfer Rate:1 GbpsData Link Protocol:Ethernet; Fast Ethernet; Gigabit EthernetNetworking / Ports Qty:8 x Ethernet 10Base-T Ethernet 100Base-TX Ethernet 1000Base-TVoltage Required:AC 120/230 V ( 50/60 Hz )Flow control auto-uplink (auto MDI/MDI-X) ; Compliant Standards :FCC Class A certified VCCI EN 60950 ICES-003 IEC 60950 UL 60950 CSA 22.2 No. 60950 FCC Part 15 B EN 55022SystemNetworking / Compliant Standards:IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.1p IEEE 802.3xInterfaces:8 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45UNSPSC CodeUNSPSC Code:43222612Product IDUPC:882780979895Manufacturer Part:J9077A#ABA

Click here for more information about HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

Read More...

NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub Review

Average Reviews:

(More customer reviews)Net gear is owned by by Bay Networks, which does not make rinky dink equipment.
This hub has solid metal construction, sockets in the front, and lots of flickering lights that show the tranfer speed, and show who is connecting at either 10 or 100 Mbs. We use it to share one (adelphia 2-way cable) internet connection among 6 PCs, along with files and printing. No problems so far.
This hub handles the standard hub task with ease, and with a utilitarian aesthetic quality that you won't see in 3com's white plastic. 3Coms tries to disguise their hub as an external modem- why?
(p.s. I'm confused as to why 3Com's 8-port 10/100 hub costs over twice as much)

Click Here to see more reviews about: NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub

The Netgear DS-108 10/100Mbps Dual Speed Hub connects multiple PCs to share printers, files, Internet access, and e-mail communications. You can mix and match 10 and 100 Mbps PCs, servers, and peripherals with this hub, all without any configuration required. The DS100 family combines many capabilities in a compact package and is designed for cost-conscious small-business users.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 Mbps and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 100 Mbps traffic and 10 Mpbs traffic do not unnecessarily crowd each other.

Click here for more information about NETGEAR DS108 8 Port 10/100 Mbps Dual Speed Hub

Read More...

Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button Review

Average Reviews:

(More customer reviews)I purchased this hub as part of a network starter kit (2 PCI ethernet cards + hub) and had no problems installing it. I run both Unix/Linux and Windoze machines and wanted all machines to be networked even with a mix of operating systems running at the same time -- and that meant simultaneous internet access, multi-player games, shared printers, etc. Basically, I wanted the network to do everything, so that any family member could sit down at a machine and do what they needed to do.
The DS-104 hub delivered from the time I installed it until the day I replaced it with a router (RT-314, also from Netgear). Installation was a snap, and as soon as I turned it on, I never had a moment's trouble from the DS-104.
So why did I switch? In two words, performance and price. Although the DS-104 is a fine product, its multiuser performance simply can't compare to a switch (which was built-in to the RT-314 router I replaced it with). I noticed that performance suffered when all of us wanted to use the computers simultaneously, which got me thinking about alternatives to improve performance. I initially intended to replace the DS-104 with a switch. After checking prices, I realized that I could actually purchase a router (switch + hardware firewall) for less than the cost of a switch alone. I eventually went that route, after receiving outstanding service from the DS-104 hub.
So was this purchase a throw-away? Hardly. The DS-104 did what it promised to do, reliably and without fuss. It handles both 10 and 100 Mbps connections transparently, so you don't even need to know the speed of whatever you're connecting. It's well-constructed (metal case instead of plastic) and absolutely reliable. Although I've replaced the DS-104 with a router, I haven't gotten rid of it -- I'm saving it for the day when I need to add several machines to the network and I'm out of ports on my router.
The DS-104 is solid, dependable networking at a very reasonable price. Recommended.

Click Here to see more reviews about: Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

The Netgear DS-104 4-Port 10/100Mbps Dual Speed Hub connects multiple PCs to share printers, files, Internet access, and e-mail communications. You can mix and match 10 and 100 Mbps PCs, servers, and peripherals with this hub, all without any configuration required. The DS100 family combines many capabilities in a compact package and is designed for cost-conscious small-business users.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 Mbps and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 100 Mbps traffic and 10 Mpbs traffic do not unnecessarily crowd each other.

Click here for more information about Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

Read More...

D-Link DSS-16+ Desktop 16-Port Switch Review

Average Reviews:

(More customer reviews)I picked up a DSS 16+ switch and it definitely improved our network of 14 computers. We were using the two uplinks. I purchased the system in January and it has a 3 year warranty.
Yesterday, it died completely. We lost all our ports. You cannot get through D-Link tech support by phone, and e-mail has been slow to get an RMA.
In retrospect, I think the slightly more expensive Link-Sys switches may be manufactured with better quality control.
Pete

Click Here to see more reviews about: D-Link DSS-16+ Desktop 16-Port Switch

The D-Link DSS-16+ is a powerful desktop dual-speed 16-port 10/100 Mbps Ethernet/Fast Ethernet NWay auto-negotiating switch. Designed to bring switching to the small office and small business, the DSS-16+ delivers high-speed switching capabilities at a low price per port. The switch functionally eliminates unnecessary traffic and relieves data congestion by delivering dedicated bandwidth for each of the 16 ports. An individual port can connect to either an Ethernet or Fast Ethernet device, and n-way auto negotiation automatically determines the transmission speed of the attached device on each port.
The DSS-16+ provides dynamic buffer allocation that employs network-load balancing for faster data handling. The uplink interface connection enables easy expansion. The DSS-16+ uses fast store-and-forward architecture to ensure low latency and high data integrity, and supports stacking through two MDI-II uplink shared ports.
D-Link offers a lifetime warranty.

Get 20% OFF

Click here for more information about D-Link DSS-16+ Desktop 16-Port Switch

Read More...

Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports Review

Average Reviews:

(More customer reviews)Reliable, Simple, and most important CHEAP
we have it runing on a data network for a retail store, and it works great
using all ports as well as the GBIC uplink, no issues, been working for a few months.

Click Here to see more reviews about: Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports

Cisco SF 102-24 10/100/1000 26 - 2Port Eth Switch

Get 19% OFF

Click here for more information about Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports

Read More...

Cisco-Linksys EG005W Gigabit 5-Port Workgroup Switch Review

Average Reviews:

(More customer reviews)Amazon is NOT shipping the pictured item - they are shipping the EG005W-V3, which is not only a totally different form factor - it has fewer features (led indicates connection only).
On the plus side, This one has no fan so is totally quiet - on the minus side, the V3 version is cheaper and that lower price is NOT reflected here!!

Click Here to see more reviews about: Cisco-Linksys EG005W Gigabit 5-Port Workgroup Switch

If you need an affordable, versatile way to make lightning fast local network connections, the Linksys EG005W Gigabit 5-Port Workgroup Switch is the answer. Get blistering speeds of up to 2000 Mbps with this wired switch, which allows heavy users of multimedia, graphics, video, and other bandwidth-hungry applications to share and transfer large files with ease. Plus, thanks to the technology built into the EG005W you can mix clients that support slower, 100 Mbps speeds with those that run at full gigabit speeds -- without any speed loss. Simply put, the EG005W is the perfect solution for your desktop gigabit and 10/100 networking needs.
With workstations that support Gigabit Ethernet networking, you'll see amazing speed increases over 10/100 Mbps networks. Connect your clients to the full-duplex ports and see your data traffic efficiency improve several times over. Dedicated bandwidth of up to 2000 Mbps can be attained with the EG005W, making it perfect for graphics, multimedia, and other applications that have to move large files across the network quickly.
A full array of LED indicators are provided on the front of the EG005W, giving you detailed information about the status and performance of the switch:
Power: The power LED lights up when the switch is powered on.
Link/Act: The Link/Act LED blinks when data is being sent or received through the port. When the LED is off, there is no data being transferred through the port.
Speed: The speed LED blinks when that port is transmitting at 1000 Mbps. If the LED is not lit, the port is transmitting at 10 or 100 Mbps.
FDX: If the FDX (Full Duplex/Collision) LED is lit up continuously, the connection made through the corresponding port is running in full duplex mode. If the LED is blinking, the port is experiencing data collisions. Infrequent collisions are normal. If this LED is blinking often, there may be a problem with your connection.
Amazing versatility is built into the EG005W. Simply install this switch in place of your current workgroup hub or switch, and you can network your high-requirement workstations with Gigabit Ethernet speeds, while continuing to service other clients at their current speeds. Or build your network from the ground up, and choose the link speeds that are right for each of the users on your network.
The EG005W is designed to integrate easily with your existing network and you can connect your existing 10/100 Ethernet network to your gigabit server backbone without any additional equipment. All ports on the EG005W are auto-negotiating, and they have automatic MDI/MDI-X crossover detection. This means that you no longer have to fuss with which type of cables you're using, as crossover and regular networking cables are automatically detected. Other advanced features include address learning and aging, as well as 802.3x flow control. Plus, head-of-line blocking prevention keeps your high-speed clients from bogging down in lower-speed traffic.
What's in the Box EG005W Gigabit 5-Port Workgroup Switch, AC power adapter, registration card, and user guide

Click here for more information about Cisco-Linksys EG005W Gigabit 5-Port Workgroup Switch

Read More...

Cisco SD2008 8-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Signifiant changes have occurred over the life of this switch. Version 1 had an internal fan and was quite noisy, albeit cool running. Version 2 & 2.1 eliminated the fan. However capacitor C251, sitting next to an internal heatsink is prone to failure after 6 - 8 months, resulting in dropped packets and link connections. Version 3.0 has solved this problem with a complete re-layout of the printed circuit board (PCB), with a redesign of the power/voltage regulation. The new version, still fanless, runs MUCH cooler than version 2.1.

Click Here to see more reviews about: Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Harness the full power of your network with the Cisco SD2008 8-Port Gigabit Switch thatprovides nonblocking, wire-speed switching for your 10-, 100-, and 1000 megabit (Mb) network clients, all from the comfort of your desk. Formerly Linksys Business Series, now Cisco Small Business Unmanaged Switches, the SD2008 Desktop Switch allows the connection of up to 8 separate devices into your network - computers, printers, and servers - to share and transfer files and videos across your network.World-famous Cisco reliability and limited lifetime warranty gives you peace of mind.

Get 14% OFF

Click here for more information about Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Read More...

TRENDnet 16-Port GREENnet Ethernet Switch (16 x 10/100Mbps Auto-Negotiation RJ-45ports) TE100-S16EG (Black) Review

Average Reviews:

(More customer reviews)I found this product while looking for a way to split the LAN at my job into two. We get one ethernet cord running to our desk and that's it. I was worried that my company would have some kind of block to not allow this to happen (they don't allow streaming video, audio, etc... so they block a lot of things). I found the unit on sell (about half price) and decided it was worth the price to try it. I tried it at home at first and it worked great (I have a router at home, so don't really need this at home, but just wanted to make sure it worked at home so if it didn't at the office, then I'd know it wasn't the device). I unplugged the ethernet from one computer, plugged this in and plugged in two computers. So, basically, there was one ethernet cord going from the router to the TRENDnet box and two computers branched off from there. Worked great - no set up needed, just plug-n-play. So, now for the big test: I took it to work. Worked with no big problems - same plug-n-play. The only thing is that when I plug my computer directly to the work LAN, it says the connection at 1 GBPS, but through this device, it shows up as 100 MBPS. I can't really tell any problems so far with speed - everything is working as normal, but now I have online access on both my work computer and my laptop. So, for me, this device works as advertised and meets my needs.
PS - sorry for my non-technical review, but I'm no tech expert!
PPS - don't forget you'll need an additional ethernet cord to make this connection. I didn't think of it at first, but luckily remembered before I finished my transaction and was able to pick up a cheap 3-footer.

Click Here to see more reviews about: TRENDnet 16-Port GREENnet Ethernet Switch (16 x 10/100Mbps Auto-Negotiation RJ-45ports) TE100-S16EG (Black)

TRENDnet 16-Port GREENnet Ethernet Switch (16 x 10/100Mbps Auto-Negotiation RJ-45ports) TE100-S16EG (Black)

Get 38% OFF

Click here for more information about TRENDnet 16-Port GREENnet Ethernet Switch (16 x 10/100Mbps Auto-Negotiation RJ-45ports) TE100-S16EG (Black)

Read More...

D-Link 16-Port 10/100/1000 Rackmountable Switch Review

Average Reviews:

(More customer reviews)I have had this gigabit switch for around 3 weeks now. It works as desired and setup is, well, trivial. Just remember that this switch is UNMANAGED, so no VLAN's or anything like it.
I was also afraid it would be noisy because of its fan, but it turned out to be very quiet as well. I strongly recommend this product.
By the way, this switch came to replace an old D-Link 10/100 hub that worked almost non-stop for 7 years! I have no doubt of D-Link's quality, at least so far.
Finally, I must say that so far I have no complaints on this product, not even the slightest.

Click Here to see more reviews about: D-Link 16-Port 10/100/1000 Rackmountable Switch

D-Link - DGS-1016D - 16-Port 10/100/1000 Unmanaged Layer 2 Gigabit Switch

Get 14% OFF

Click here for more information about D-Link 16-Port 10/100/1000 Rackmountable Switch

Read More...

TP-Link TL-SG1008D 8-port Gigabit Ethernet Switch Switch - 8 ports - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T Review

Average Reviews:

(More customer reviews)I bought this switch because of the price and specs.
Transfering HD videos from my office to the file server became a pain at 100Base-TX.
When I saw this switch in the 8 port configuration, I jumped on it for the price.
I wasn't even sure how well it would work on my CAT-5 wiring.
Bingo! It all came up gigabit on the PCs that had 1000Base-TX NICs running. Tt's really fast.
My transfer times are great and I can edit large files right off the server without doing a copy over first. I also bought the TP-Link 100Base-TX PCI cards for the PCs that were not gigabit. No problems with Vista or XP using these cards.

Click Here to see more reviews about: TP-Link TL-SG1008D 8-port Gigabit Ethernet Switch Switch - 8 ports - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T

Spotlight:
* 8-port 10/100/1000M Gigabit Ethernet Desktop Switch * Supports MAC address self-learning and auto MDI/MDIX
description:
The TL-SG1008D 8-port Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files and other applications that have to move large files across the network almost instantly.
Features:
* Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode * Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput * Supports MAC address auto-learning and auto-aging * LED indicators for monitoring power, link, activity * Plastic case, desktop or wall-mounting design * External power adapter supply

Click here for more information about TP-Link TL-SG1008D 8-port Gigabit Ethernet Switch Switch - 8 ports - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T

Read More...

D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch Review

Average Reviews:

(More customer reviews)This is an unmanaged switch, which means that you can not configure Virtual Local Area Networks (VLANS) or Quality of Service (QoS) - though QoS is supported through the implementation of 802.1p, but all the attached devices must support 802.1p in order to use it. Since there is no configuration, all you have to do is plug it into power and plug your devices into it. It really is that simple for any unmanaged switch. It will automatically allow all your devices to talk to each other at the physical layer. Of course, your applications must be configured right to talk to each other, but these unmanaged devices make building the infrastructure a snap.
In answer to a previously posted review, I tested this device in the following way:
-Port 1 connected to my desktop computer with a Gigabit network interface card (NIC)
-Port 2 connected to a 10/100 switch which was connected to a gigabit ethernet storage device
-Port 3 connected to a second DGS-2208 switch which was connectedto the exact same model gigabit ethernet storage device
-Port 4 connected to a laptop with a 10/100 NIC
The point of this setup was to use the identical computer communicating with identical devices through a 10/100 connection and through a gigabit (1000) connection. I transferred a 10 GB file to the ethernet storage device through the gigabit connection first and then I transferred the exact same file through the 10/100 connection. The GB connection was about five times faster.
Now, this proves that the switch does not automatically throttle back to the slowest "connected" device. However, it does not indicate whether the gigabit connections will slow to the speed of 10/100 connections if those slower connections are actually active.
To test this, I transferred the same file from the laptop to the slower connected ethernet storage device while also transferring the file from the desktop to the faster connected ethernet stoarage device. The results? The gigabit connected devices still transferred the data at rates faster than possible on a 10/100 connection. This proves that the gigabit speeds are still achieved even when a 10/100 connection is active.
In the end, due to memory and processor limitations, this device cannot even compare to enterprise-class gigabit switches from Cisco and other providers; however, it is the best performing gigabit switch I've ever seen for under $75.
[...]------------------------------------


Click Here to see more reviews about: D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch

Unmanaged Gigabit Switch, 8-Port 10/100/1000Mbps

Click here for more information about D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch

Read More...

Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch Review

Average Reviews:

(More customer reviews)Here's my story. I used to have (note past tense) pretty much all Linksys gear in my home. Router, switches, print servers, etc. Over a half-dozen devices because our condo is wired like an office with network drops everywhere.
All of a sudden in the span of about 6 months, one-by-one most of the devices just died. They had power, but simply would not pass network traffic. I wrote to Linksys and basically said, "Here's my situation, meet me half-way, do something, anything to keep my business." They never replied. So I began a quest to look into a new switch for my home office. I decided I wanted a 16 port model because I might max out an 8 port unit.
I noticed that the "ProSafe" line from Netgear comes with a lifetime warranty and 24/7 technical support (although how much support can one need for an auto-sensing switch, assuming it's actually working.) So I gravitated toward that line of products. Then looking at the comparison charts I was trying to determine the difference between the mid-level "GS" series and their top-of-the-line "JGS" series switches.
There is only one: The JGS models have a built-in power supply. Meaning, no "brick," just a standard 3-prong power cord.
Sold!
My only complaint (and it is significant): The little fan inside this monster is quite noisy. Almost as loud a standard desktop PC, which uses a much larger power supply and fan. Mind you it does not sound "cheap." It sounds like a quality fan and power supply. It quite simply needs a little better ventilation and Netgear needs to invest that whopping extra 2 bucks on a higher grade fan that it is truly whisper quiet.
So in summary, fine for a network closet or an open area with a few people an other things that make modest constant noise, but think about it a bit if it will be in a "quiet" office setting. With quieter operation, it would easily earn 5 stars in my book.

Click Here to see more reviews about: Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch

NETGEAR's unmanaged JGS500-series switches make it affordable to take Gigabit to the desktop. These unmanaged 10/100/1000 Gigabit Ethernet switches provide high-speed connectivity for small office networks at an economical price a savvy business owner can't ignore. All 16 or 24 switched 10/100/1000 ports deliver up to 2000 Mbps throughput, up to 48 Gbps of backplane bandwidth, and Auto Uplink technology to adjust for straight-through or crossover cables. These high-performance switches can combine 10, 100 and 1000 Mbps devices within a network, and are conveniently compact for either the desktop or rack mounting.Ideal for work groups, departments or any small network looking for the ultra fast desktop connections.

Get 13% OFF

Click here for more information about Netgear JGS516 ProSafe 16-Port Gigabit Ethernet Switch

Read More...

Share Max N300 Wireless N Rout Review

Average Reviews:

(More customer reviews)The Router Reviewed here has a PART number F7D7301 (Red Box) but in reality it is nothing but F7D3301 in disguise (Peeling off the F7D7301 Sticker will reveal that it is a Belkin F7D3301.
Why did I pick this? when there are so many frustrated users who has complained about this router!!!
The main reason is to use this router for a cheap NAS solution, The beauty of this device is that it can natively support NTFS (Read/Write) support using it's 2 USB slots! This opens up a whole world of possibilities, You can connect a USB hub and it can mount multiple HDDs connected (Up-to 2TB each) to the router and share those drives around the house wireless! at 802 11n! speeds!, you can attach a regular USB printer and make it a wireless printer and if you have media sharing devices that you can join the private N Wireless network so all other devices in the house can share media files the list goes on and on...
Agreed with others who commented here on Amazon on the intermittent issue one might encounter, But as I do not use it to connect to Internet, I did not experience any dropout issues. I just use this for Sharing files and media around in the house with a secured PRIVATE home wireless Network.
The Software CD that comes along with the device is useful for people who do not know anything about routers or networking and they have done an excellent job, But If you are networking Guru, you will discard the CD and start tinkering with the device and you can setup a very secure N wireless network in no time.
People complain about not being able to see their shares and need to use the BELKIN provided bloat-ware to map their shared drives? Why? it is so simple to map a network drive if you simply browse your network like for example \\192.168.2.1\ and you will see your shares!
The Belkin F7D7301 (Red Box) can also be DD-WRT'ed (Loading third party Firmware), I attempted that but did not find NTFS Read/Write auto-mount support so I flashed the Factory firmware back from CFE interface.
NAS solutions are not cheap to make, But when you find this router onsale at Big Box stores as well as Amazon it is well worth a try! as they do work!... you just have to have some patience and some Networking knowledge to achieve what you have in mind.
**** Update: FEB 28, 2011 ****
This router has an inherent software bug that causes frequent drop outs and hangs which was bugging me... and I am happy to report that I have finally managed to install DD-WRT open source firmware on this router and it now works like a champ with 100's of new features and is very stable for couple of weeks now!
It also supports 2x 2TB NTFS formatted drives with Read/Write via the NAS interface!! with DD-WRT open source FW very Cool!
Please see comments for details....
Good Luck!


Click Here to see more reviews about: Share Max N300 Wireless N Rout

Belkin F7D7301 Wireless Router - 300 Mbps F7D7301 Routers & Gateways - Wireless

Click here for more information about Share Max N300 Wireless N Rout

Read More...

Netgear FS105NA Switch 5Port Metal Review

Average Reviews:

(More customer reviews)With switch prices coming down to about $10-per-port, it's hard to justify buying anything less than a 10/100-switch for all but the most cost-conscious buyer.
As most 5-port 10/100 switches have the same capabilities and cost about the same, there's not much to distinguish one from another. Still, I particularly like the Netgear FS-105 5-port switch. Like other products from Netgear, this switch is a little nicer than the competition because it has:
- Nice sturdy metal construction instead of plastic. The case also has a grounding tab in case you're using the switch in a (electrically) high-noise environment.
- Connection status indicators built into the jacks, so you can easily tell which cable is connected and is active. (The "vistajack" feature.)
- Right-angled barrel power connector which reduce the likelihood of disconnecting power accidentally.
- An easy-to-access switch to toggle port 1 between station mode and uplink mode. Unlike some hubs where two jacks are wired together, this design prevents accidentally shorting a station to an uplink.
- Screw-mount notches on the underside allows for easy attachment to the wall, underside of a counter, etc.
With a 1000-MAC address buffer and 200 Kbytes-per-port packet buffer, this switch can easily handle the typical traffic load of small- and medium-sized networks.
The Netgear product is not the cheapest 10/100-switch (check out the D-Link Fast Ethernet Switch, for example), but for overall design and value-for-money, I still like the Netgear the most.

Click Here to see more reviews about: Netgear FS105NA Switch 5Port Metal

The NETGEAR FS105 ProSafe 5-Port 10/100 Desktop Switch provides your local area network (LAN) with a reliable 10/100 Mbps auto-sensing connectivity for five users.
Sturdy and Reliable Design NETGEAR's FS100 series desktop switches are housed in a compact sturdy metal case designed without the need for internal fans, keeping operation both silent and more reliable. It can be placed on a flat surface or you can use the included wall mount kit.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto negotiation, which automatically obtains the fastest possible connection, and Auto Uplink takes care of the MDI/MDI-X connection. There are no toggle switches or special crossover cables. If your network has existing 10BASE-T devices, they will work seamlessly within a higher bandwidth environment with each port achieving its full speed.
Every port supports up to 200 Mbps in dedicated bandwidth. Automatic flow control ensures smooth traffic. The FS105 has 64 KB of buffer memory and an address database size of 1,000. The switch has status LEDs for power, and link, speed, and activity for each port.
The NETGEAR FS105 ProSafe 5-Port 10/100 Desktop Switch has a Mean Time Between Failure (MTBF) of 390,000 hours and is backed by a lifetime warranty. The power adapter is backed by a 2-year warranty.
What's in the Box FS105 Desktop Switch, wall-mount kit, power adapter, quick installation guide, warranty/support information card.

Click here for more information about Netgear FS105NA Switch 5Port Metal

Read More...

NETGEAR GS608NA Giga Switch 8Port Review

Average Reviews:

(More customer reviews)NETGEAR's GS608 8-Port Gigabit Desktop Switch is a good product with nice clean lines. The one I have actually works flawlessly for my needs. The problem I have is that I have noticed that there is a wide variation in performance depending on the version of the switch that you get. If you have a v1, you will not get full jumbo packet support, thereby limiting you to 20 MBps. If you have v2, you will get full jumbo packet support, but non-windows computers seem to have hardware issues interfacing with the ports. And now that I have gotten to use the version 3 rendition in a Windows only situation, I can say that the performance was good. But I can't help but wonder, what happens when I have to hook up one of my Unix or linux workstations in that room? What if I have to connect a Mac? Will version 3 have the same compatibility problems as version 2? So my main gripe is, why didn't Netgear just scrap this product line and create a new product with a new model number if they new they had hardware problems with different revisions? Those buying from Amazon will probably get version 3, but if you try to buy this at a brick and mortar store all bets are off. Depending on how long they have had inventory, you can get any of the three. So the moral of the story is, definitely try to avoid versions 1 and 2 if possible.
How do you know which version you have? On the bottom of my switch, there was a white sticker with the standard power rating info and random information. Towards the bottom of the text it had the model number with *v3* appended to it, with no spaces. So if you have v3, the actual model number will look like "Netgear GS608v3*. The same goes for v2. I believe that v1 doesn't have any special markings on it, though I don't have one of those handy to verify that.
As to speed and performance, the v3 definitely works great. Each port is represnted by a number on the front of the switch. You will know that it is running in gigabit ethernet mode and connected to a cable if the port is lit up green. So if you see a green 1, 3 and 4, that means each of those ports are in use by network cards that are GigE capable.
Since all three of these are still sold under the same model number, I have to average out the performance of the others with the latest revision. As long as you get the latest revision, you should be OK in terms of features and performance at the higher end of the speed limits of gigabit ethernet. But as for whether or not all the problems with alternative TCP/IP compatibility, I have to test that a little further before I will feel comfortable that they have solved the problems of v2. If that happens, I may revisit changing this rating but until then I think this is a good device that still has some risks associated with it.
Enjoy.

Click Here to see more reviews about: NETGEAR GS608NA Giga Switch 8Port

The NETGEAR GS608 8-Port Gigabit Desktop Switch connects up to eight network devices at up to 1000 Mbps over Ethernet cables.
Sturdy and Reliable Design NETGEAR's GS600 series switches are designed for use in a home and small office, housed in a compact white case that blends into your home decor. A fanless design keeps operation both silent and more reliable, and ports are located in the rear to reduce cable clutter. Each port has status LEDs for link and activity. The switch can be placed on a flat surface or vertically on the included stand.
Simple Setup and Stellar Performance Plug in your Ethernet cables and connect a power cord, and you're ready to go. There is no software to install or settings to configure. The switch features auto negotiation, which automatically obtains the right speed and mode, and Auto Uplink adjusts for the different types of Ethernet cables. There is no need for toggle switches or special crossover cables. The device can seamlessly integrate 10, 100, and 1000 Mbps devices on the same network and honors Layer 2 priority tags.
All ports deliver up to 2000 Mbps speed and the switch supports 9,000 byte frames when set to support jumbo frames. There is a 1 Mb packet buffer memory and support for a MAC address database of 4,000.
The NETGEAR GS608 8-port Gigabit Desktop Switch has a rated Mean Time Between Failure (MTBF) of 87,600 hours and is backed by a 2-year warranty.
What's in the Box GS605 8-port Gigabit Desktop Switch, AC power adapter, vertical stand, installation guide, warranty/support information card.

Get 24% OFF

Click here for more information about NETGEAR GS608NA Giga Switch 8Port

Read More...

Cisco SR2016T 16-Port Rackmount 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Cisco's marketing department royally screwed up naming this product. They chose a model number (SR2016T) that is one character away from another product (SR2016), which was so horribly panned by customers that it was pulled from the market. They should have just used the part number (SG 100-16) and left it at that. To be clear, this switch bears NO relation whatsoever to the Linksys SR2016 switch. The 24 port models are different as well.
My specific need was for a 16+ port gigabit switch that is quiet (silent if possible) and that will last a long time, running 24x7, completely neglected in a dusty closet. This unit is fanless, delivering on the quiet part, and also making it less likely to suffer from dust build up that can lead to overheating. I can't say yet how well it will hold up over the long term, but I'm not too worried since it comes with a lifetime warranty too.
So far I have had zero issues. Every device that was working on the original switch (an SMC8624 that is being re-tasked) immediately came up at 1Gb on the new switch. Recommended.
Note: the product literature is unclear and sometimes contradictory, but the 16 port model has an internal power supply (no wall wart) and comes with a limited lifetime warranty.

Click Here to see more reviews about: Cisco SR2016T 16-Port Rackmount 10/100/1000 Gigabit Switch

The Cisco SG 100-16 16-Port Gigabit Switch, a Cisco Small Business Unmanaged Switch, will boost your network performance and support all of your essential business applications.

Get 23% OFF

Click here for more information about Cisco SR2016T 16-Port Rackmount 10/100/1000 Gigabit Switch

Read More...